Analog Output Configuration - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules
4.4.7

Analog Output Configuration

The table describes the parameters contained in the "Analog Output Calibration" section.
Item
AO Channel
AO0 ~ AO7
Modbus Format
Host Timeout
Update Settings
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Set the data type, Power-on value, Safe value, and Slew Rate for
each channel.
Set the data format. It can be Hexadecimal or Engineering
This parameter is used to configure the Host Watchdog timeout
value. If there is no Modbus TCP communication activity for the
specified period (the timeout), the AO will be set to the user-
defined safe value.
Click this button to save the changes.
Description
-53 -