Appendix A: Troubleshooting; How Can I Factory Reset The Module (Password: Admin) - ICPDAS ET-2268 CR User Manual

ET-2200 Series Ethernet I/O Modules

Appendix A: Troubleshooting

A.1

How can I Factory Reset the Module (Password: Admin)?

If the module encounters an anomaly and you cannot access the module's web server for
configuration, or if you have forgotten the login password, you can perform a factory reset of the
module. Please note that after completing the following steps,
will be erased
Step 1
Adjust the Init/Run switch to the "Init" mode and reboot the
module to load factory settings, including the default web
password.
Step 2
Execute the eSearch Utility to verify that the module has been reset to the
factory settings. For example, the default IP address is "192.168.255.1". And then,
modify the network settings (e.g., the IP, Mask, and Gateway addresses) and click
the "OK" button.
2
.
1
.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
3
.
all of your customized settings
-171 -