ICPDAS ET-2268 CR User Manual page 109

ET-2200 Series Ethernet I/O Modules
Set the outputs of the AO channel – the SET command
To do: Right-click the aoValue entry in the Result Table and click Set to display the SNMP SET
dialog box. Enter the value 1.000 (output 1V) in the Value field to set the AO value.
After completing the setting, execute the Walk command by right-clicking the iso.org.dod.internet
folder on the left side of the window to update the value.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved. -109 -