ICPDAS ET-2268 CR User Manual page 158

ET-2200 Series Ethernet I/O Modules
Starting
Points
Address
151
1 to nDI
(0x97)
190
1 to nDI
(0xBE)
235
1 to nDO
(0xEB)
267
1 to nDO
(0x10B)
299
1
(0x12B)
300 ~ 315
(0x12C ~ 1 to UDIO
0x13B)
"R": Read
"W": Write
Notes "F": Settings are recorded in flash by default
"E": After writing DO[60] register, the data will be stored in flash.
Warning: Frequency writing to the Flash can cause it to become corrupt.
Note:
Because of the characteristics of the relay functions, it is recommended that the PWM on ET-
2260/2261/2268 series (i.e., modules with relay functions) is not used for extended periods.
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
Description
Enables the high-speed digital
counter for all DI Channels
Enables frequency measurement
for all DI Channels
Sets the Power-on value for all DO
Channels
Sets the Safe value for all DO
Channels
Force the DI/DO Mode.
(for the ET-2254 only)
0 = Dynamic I/O type based on DO
requests.
1 = Static I/O type by configuration
(web or Modbus).
Sets the Universal DIO channels to
DI or DO Port.
(for the ET-2254 only)
300 is the CH0 address, 301 is the
CH1 address, and so on.
Bits per
Range
Point
0 = Disable
1 1 = Enable
(Default= 0)
0 = Disable
1 1 = Enable
(Default= 0)
0 = Off
1 1 = On
(Default= 0)
0 = Off
1 1 = On
(Default= 0)
0 = Dynamic
1
1= Static
0 = DO type
1
1= DI type
Access
Type
R/W/F
R/W/F
R/W/F
R/W/F
R/W
R/W
-158 -