Ctrl Scene (Controller Scene) (Cs6X); Ctrl Knobs [A] To [C - Yamaha CS6X Owner's Manual

BCCurve (TG Breath Curve)
Set the Breath Curve determining how the strength
with which you blow into the Breath Controller will
affect the sound output.
Settings: thru, soft, hard, wide
Adjusted Breath Control
thru
Received Breath Control
Adjusted Breath Control
soft
Received Breath Control
Adjusted Breath Control
hard
Received Breath Control
Adjusted Breath Control
wide
Received Breath Control
CTRL (System Controller)
In Voice Mode, you can set parameters for Controllers.
The following five screens are available.
CTRL KnobA (Control Knob [A])
CTRL KnobB (Control Knob [B])
CTRL KnobC (Control Knob [C])
CTRL Scene (Control Scene)
CTRL Other (Control Other)

CTRL Knobs [A] to [C]

You can assign various control functions to Assignable
Knobs [A] to [C] on the front panel.
CTRL KnobA) CC#
Sys 67[--------]
CC# (Control Number)
Assign MIDI Control Change Numbers to Assignable
Knobs [A] to [C].
Settings: 000 ~ 095 (see the separate Data List for
Dest (Control Destination)
Set the function to be controlled by Assignable
Knobs [A] to [C].
Settings: see the separate Data List for details
The positions of Knobs [A]/[B]/[C] can be memorized
for each Voice, Performance and Phrase Clip.
If a Master Equalizer parameter is selected as the
destination, the M.EQ settings of "vce" (in Utility
Mode) are increased/decreased Using Knobs
[A]/[B]/[C].

CTRL Scene (Controller Scene) (CS6x)

Set the SCENE [CONTROL] knob parameters.
CTRL Scene)
Sys
Scene Control (Scene Control Number)
Assign a MIDI Control Change Number to the
SCENE [CONTROL] knob.
Settings: 000 ~ 095 (see the separate Data List for
CTRL Other (Controller Other)
Set the Foot Switch and Foot Volume parameters.
CTRL Other)
Sys
FS (Foot Switch)
Assign a Control Change message to the Foot Switch.
Settings: 000 ~ 100 (000/032 = off, 096 = Arp Sw, 097
The available settings for the CS6R are 000 to 095.
Details about Control Numbers and Control Changes
are given in the separate Data List.
FV (Foot Volume) (CS6x only)
Select whether Foot Volume controls the Main
Volume or Expression parameter.
Settings: volume (Main Volume), expression
Dest
EQLow-G
Details about the Main Volume and Expression
parameters are given in the separate Data List.
165
details)
Scene Control
65[Porta Sw]
details)
FS
65[Porta Sw]
= Arpeggio Hold, 098 = Sequence PLAY/STOP,
099/100 = Program Change INC/DEC)
FV
volume