Table of Contents
Advertisement
Figure 4–1: Releasing the inner source
Result:
You may hear a small hiss when the source chamber vents.
4.
Carefully slide the inner source out from the instrument.
Figure 4–2: Removing the inner source
Note:
If you cannot slide the inner source out of the instrument, you may need to wait for
the chamber to fully vent to atmospheric pressure.
5.
Stand the inner source upright on its handle on a flat bench.
April 27, 2020, 715005564 Ver. 01 (previously released as Rev. A)
Page 57
Advertisement
Table of Contents
