User Interface - Kaco blueplanet 3.0 TL3 M2 WM OD IIG0 Manual

Manual
Operating status
Non-grid feed mode
Error
9.3

User interface

After being switched on and after initial commissioning is complete, the device displays the start screen (the
desktop). If you are in the menu and do not touch any control buttons for 2 minutes, the device returns to the
start screen.
1
8
7
6
5
Fig. 40: Desktop
1 Current date
2 Status bar
3 Current time
4 Feed-in indicator
Graphical display
The graphical display shows measured values and data and allows the configuration of the device using a
graphical menu. In normal operation, the backlighting is switched off. As soon as you press one of the control
buttons, the backlighting is activated. If no button is pressed for an adjustable period of time, the backlighting
switches off again. You can also activate or disable the backlighting permanently.
The device has a backlit LCD display as well as three status LEDs. The device is operated using 6 buttons.
Control buttons
The device is operated using the 4-way button and the Enter and ESC buttons.
KACO blueplanet 3.0 TL3 KACO blueplanet 4.0 TL3 KACO blueplanet 5.0 TL3 KACO blueplanet 6.5 TL3 KACO
blueplanet 7.5 TL3 KACO blueplanet 8.6 TL3 KACO blueplanet 9.0 TL3 KACO blueplanet 10.0 TL3
Configuration and operation | 9
LED Icon Display
Status message
Fault message
2
3
4
Description
The green LED "Feed" is flashing be-
cause one of the modes: internal
power reduction, external power re-
duction, idle power request or stan-
dalone mode is active.
The device feeds into the grid.
The interface switch engages audibly.
The display shows the corresponding
message.
The display shows the corresponding
error message.
The red "Fault" LED is lit.
5 Annual yield
6 Daily yield
7 Menu indicator
8 Current power
Page 33