User Interface - Kaco blueplanet 87.0 TL3 M1 WM OD IIF0 Manual

Manual
Operating status
Fault
9.3

User interface

NOTE
Depending on the tolerances of the measuring elements, the measured and displayed values are not always
the actual values. However, the measuring elements ensure maximum solar yield. Due to these tolerances, the
daily yields shown on the display/screen may deviate from the values on the grid operator's feed-in meter by
up to 15%.
Operation mode
Previous page
Status history
Fig. 57: Monitoring interface
KACO blueplanet 110 TL3 KACO blueplanet 125 TL3 US
Configuration and operation | 9
LED Symbol Description
None of the LEDs is illuminated or the red "Fault" LED is illumi-
nated.
Fault in the AC/DC source
Conditional special cases:
– There is no DC voltage present (e.g. DC isolator switch open)
– DC voltage too low (< starting voltage)
DC voltage is present (> starting voltage), but communications con-
nection between the front end (operating unit) and back end (con-
trol unit) is faulty, or interrupted.
Activity indicators for
communication interfaces
Current
meassurements
Selected
meassurements
Main Menu
Reactive power factor
Current power
Next page
Current reactive power
Activity displays
cumulative yield
String Combiner (Opitonal)
Inverter AC
Inverter DC
Language
Export
Page 45