Table of Contents
Advertisement
8.
Route and connect the data cable.
9.
If needed, install an optical drive (Installing an 8 SFF optical drive on page 66).
10. Install the access panel (Install the access panel on page 32).
11. Install the server in the rack.
12. Connect each power cord to the server.
13. Connect each power cord to the power source.
14. Power up the server (Power up the server on page 31).
Installing the 4 LFF optical drive option
Prerequisites
Before installing this option, be sure that you have the following:
Hardware options installation
77
Advertisement
Table of Contents
