Details On Important Parameters - Omron OMNUC G Series User Manual

Ac servomotors/servo drives with built-in mechatrolink-ii communications

Hide thumbs Also See for OMNUC G Series:

5-27 Details on Important Parameters

 This section provides an explanation for the particularly important parameters.

Be sure to fully understand the meanings of these parameters before making changes to the

parameter settings.

 Do not set or change the default values for user parameters listed as "Reserved".

 The attribute indicates when the changed setting for the parameter will be enabled.

Always enabled after change

Change prohibited during Servomotor operation and command issuance.

(It is not known when changes made during Servomotor operation and command issuance

will be enabled.)

Enabled when the control power is reset, or when CONFIG command is executed via the

network (MECHATROLINK-II communications).

Read-only and cannot be changed.

Timing when changes will be enabled