Omron OMNUC G Series User Manual page 312

5-26 User Parameters
 Operating Procedures for 32-bit Positioning Parameters
1. Displaying Parameter Setting Mode
Key
operation
5
2. Selecting the Parameter Type
Key
operation
3. Switching to the Parameter Setting Display
Key
operation
4. Setting the Parameter Number
Key
operation
5. Displaying the Parameter Setting
Key
operation
5-57
Display example
The default display is displayed.
Press the
Uknk_k5kpkd
Press the
1k6kbkiktkp
Display example
3k2kbkiktkp
Press the
Display example
pknk_krk0k0.k
Press the
Press the
3k2
Display example
pknk_krk0k5.k
Set the number of the parameter to be set or checked.
3k2
Display example
k k6k3k2k8.
Press the
The selected parameter number appears in the sub window.
0k0
32-bit parameters have many digits and thus displayed on two displays.
Hk k k k k
Press the
0k0
Negative values of the parameter are indicated with a dot.
Explanation
key to display Monitor Mode.
key to display Parameter Setting Mode.
Explanation
keys to select 32-bit parameters.
Explanation
key to go to the Parameter Setting Display.
key to return to the Parameter Type Selection Display.
Explanation
Explanation
key to display the setting.
key to change the display.