User Parameters; Setting And Checking Parameters - Omron OMNUC G Series User Manual

5-26 User Parameters

5-26 User Parameters

Set and check the user parameters in Parameter Setting Mode.
Fully understand what the parameters mean and the setting procedures, and set the parameters
according to the system.
Some parameters are enabled by turning the power OFF and then ON again. After changing these
parameters, turn OFF the power, confirm that the power indicator has gone OFF, and then turn ON
the power again.

Setting and Checking Parameters

 Overview
5
Use the following procedure to set or check parameters.
Go to Parameter Setting Mode. Press the
Select the Parameter Type ---
Switch to the Parameter Setting Display ---
Set the parameter number (Pn) ---
Display the parameter setting ---
Change the parameter setting ---
Save the changed setting to memory and return to Parameter Setting Mode ---
 Operating Procedures for 16-bit Positioning Parameters
1. Displaying Parameter Setting Mode
Key
operation
2. Selecting the Parameter Type
Key
operation
5-55
Display example
The default display is displayed.
Press the
Uknk_k5kpkd
Press the
1k6kbkiktkp
Display example
Confirm that 16-bit Parameter is selected.
1k6kbkiktkp
key, and then press the
,
,
, ,
Explanation
key to display Monitor Mode.
key to display Parameter Setting Mode.
Explanation
key once.