Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
6.3
SNMP Setting
The PMC/PMD provides SNMP(Simple Network Management Protocol)
V1 and V2c to work with the SNMP Network Management software for
monitoring the system data, power meter data and I/O module data. The
SNMP Setting page allows you to enable or modify the settings of the
SNMP function on the PMC/PMD. The following figure illustrates the set
up interface:
Please follow the steps below for the SNMP Settings：
i. In the "Version" field, select the SNMP version that you want to use.
Currently PMC/PMD supports SNMP V2c and V1 protocol,
ii. In the "Read Community Name" field, input a string for "Read
Community Name" for SNMP function . The default string is "public".
iii. In the "Write Community Name" field, input a string for "Write
Community Name" for SNMP function. The default string is
"private".
iv. In the "Trap Community Name" field, input a string for "Trap
Community Name" for the SNMP function. The default string is
"public".
Figure6-9 :
SNMP Setting Page
60
Advertisement
Table of Contents
