Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
i Select a pre-set MQTT Publish Topic message from the
ii Click "OK" button to confirm the settings and return to the Rule
11.2.6.3 Reset Topic
You can reset the saved content of the subscribe topic when
executing a THEN/ELSE Action statement; the editing page is
shown as below:
Follow the steps below:
i Select a pre-set MQTT Subscribe Topic from the dropdown list
ii Click "OK" button to confirm the settings and return to the Rule
11.2.7 Timer
You can change the Timer status (to Start or to Reset the Timer) in the
THEN/ELSE Action statement; the editing page for Timer Action
Setting is shown as below:
dropdown list of the "Broker" and "Message" fields. The
MQTT Publish Topic message will be displayed for you to
verify if this is the MQTT Publish Topic message you are going
to send to.
settings page.
Figure11-41 : MQTT Reset Topic action setting page
of the "Broker" and "Topic" fields. When this action is executed,
PMC/PMD would reset the message of the topic, and the
evaluation result of the IF statement which is associated with
the topic will be verified again.
settings page.
230
Advertisement
Table of Contents
