Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
i Specify the variable from the dropdown list of "Variable Name"
ii Set up the expression statement for the content of this Subscribe
iii Specify the user-defined evaluation value. If the content of this
iv Click "OK" button to confirm the settings and return to the Rule
11.1.5 IBM Bluemix
Click on IBM Bluemix, 2 options will appear as the following: "
Connection Status" and " Subscribe Message".
11.1.5.1 Connection Status
The Connection Status between PMC/PMD and IBM Bluemix can
be used as evaluation criteria for IF condition statement. The editing
page for IBM Bluemix Connection Status Condition Setting is
shown as below:
Follow the steps below:
i Specify the connection status to be "Offline" or "Online". If the
ii Click "OK" button to confirm the settings and return to the Rule
11.1.5.2 Subscribe Message
The Command and Variable in the Subscribe Message from IBM
field that you are going to include it in the IF condition
statements.
Topic. Select an operator from "=", ">", "=" or "<=".
variable match the evaluation criteria, the result of this condition
evaluation will be "true". PMC/PMD provides 12 values options;
you can compare them with the content of this Subscribe Topic
for condition evaluation. Please refer to
section for more detailed information.
settings page.
Figure11-13 : IBM Bluemix Connection Status condition setting
connection status of IBM Bluemix match the evaluation criteria,
the result of this condition evaluation will be "true".
settings page.
"11.1.1.2 DI
Counter"
208
Advertisement
Table of Contents
