Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
in the "Server Address" field,
click
then enter the login username and password (require to apply in
advance) in the "Username" and "Password" fields. PMC/PMD
will login and connect to the "IoTstar Trial" by the information
provided.
Please Note: For the account application of the "IoTstar Trial",
"Appendix IX：ICP DAS "IoTstar
please refer to the instructions in
Trial" account
application".
Figure6-8 :
IoTstar connection setting page(1)
After all settings are completed, click "Save" button to save the
iv.
changes. This PMC/PMD will connect to the IoTstar immediately.
The users can review the current connection status between
PMC/PMD and IoTstar through the information displayed in the
"Connection Status" field.
v.
If the "Connection status" field shows the "Connected" message, it
means the connection between the PMC/PMD and IoTstar is in
normal status. The authorized users now can login into the IoTstar
(with the username and password set in "Step iii") to perform
remote monitoring and maintenance of the PMC/PMD.
59
Advertisement
Table of Contents
