ICP DAS USA PMD Series User Manual page 70

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
 Network Setting (LAN)
Each time when the user enters this page, it will read and display current
network configuration and port settings from the PMC/PMD. In the
"Connection mode" field, please select the connection mode as "Obtain
an IP address automatically (DHCP)" or "Specify an IP address", then
modify IP/Mask/Gateway/DNS Server IP configuration. After all
settings are completed, click "Save" button to save the changes. After the
network configuration is completed, the user could login into PMC/PMD
webpage via LAN1 or LAN2, and is able to retrieve data via Modbus
TCP.
Please note:
1. PMC/PMD adopts Google DNS server as system default DNS server,
the default IP is "8.8.8.8", the IP can be modified to other DNS server
IP if required.
2. If the connection mode is "Specify an IP address", then you make
modification to the IP address, the system will logout automatically
and re-connect to the web page automatically based on the new
setting. If the connection mode is "Obtain an IP address automatically
(DHCP)", the system may fail to re-connect to the web page because
the IP address is changed. Please use PMC Utility to search the
PMC/PMD, get the new IP address of PMC/PMD, and then launch
browser to connect to the PMC/PMD with the new IP address.
 Network Setting (Mobile Network)
The Network Setting (Mobile Network) section is for user to complete
the setting of Mobile Network of PMC-5231M-4GE(or 4GC)/
PMC-5231M-3GWA. The default Dial-up number is "*99#". User can
change it by the proprietary number provided by the Telecommunication
Service Company. To configure the setting for "APN" and
"Authentication" field, please refer to the document provided on the
PMC Web page. "Mobile Code" is an optional setting. It depends on the
service the Telecommunication Service Company provides. If the user
select the "Automatic Connection When Power On" option, it will
enable the PMC-5231M-4GE(or 4GC)/PMC-5231M-3GWA to complete
the Mobile Network connection automatically when power on PMC.
User can click the "Connection Testing" button to test the Mobile
55