Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
v To verify whether the SAS Token setting is correct, click "Testing" in
the "Connection Testing" field, then PMC/PMD will try to connect
Microsoft Azure with the SAS Token setting, and reply the connection
status.
vi The lower half section on the Microsoft Azure Setting Page is for the
Publish Message and Subscribe Topic setting. User can click the tab of
"Publish" or "Subscribe" to edit the Publish Message and Subscribe
Topic. The Interface will be shown as below:
vii Click the "Publish" tab to edit the Publish Message. User can click on
"Add new Publish Message" to add a new Publish Message.
viii Input a name in the "Nickname" field and you could also input the
description of this Publish Message in the "Description" field.
ix In the "Message Type" field, select the "Channel Data" to prepare a
Publish Message with the power data or I/O channel value. Based on
the "Channel Data" interface, the user can select a specific power data
(or I/O channel value) or "All" power data (and I/O channel values) for
the Publish Message. If the user selects a specific channel, it means the
specific power data (or I/O channel value) of the module will be bound
with the Publish Message. If user select "All" channels, it mean all
Figure9-2 :
Microsoft Azure Publish Message setting page
146
Advertisement
Table of Contents
