Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
8.4
Report Sending Setting Page
The power information report can be sent to the user via email, and the
relevant parameters of the function can be set in the "Report Sending
Setting Page".
8.4.1
Sending Setting
The "Send Setting" function can automatically send an email to the
recipient when the report is generated by PMC/PMD. The setting
page is shown as below:
Follow the steps below:
i. In the "Select Email" field, Select the Email setting in the
ii. In the "Compressed File" field, verify if the attachment report
iii. In the "Report Type" field, check which type of report need to
iv. In the "Language" field, select the language of the report .
v. After complete all setting, click "Save" button to save the
8.4.2
Re-send Function
Report Sending Setting page – Sending Setting
Figure8-5 :
"Advanced Setting -> Email Setting" section, then the
"Receiver Email Address" will automatically import the
recipient list from the information of the Email you select.
file of the email have to be compressed, or not.
be sent. There are 4 options as "Daily Report", "Weekly
Report"," Monthly Report", and "Annual Report" for selection.
After complete the setting, PMCPMD Will automatically send
the report file when it is generated. (ex: The daily report will be
sent at the end of the day.).
setting.
134
Advertisement
Table of Contents
