Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
ii Click "OK" button to confirm the settings and return to the Rule
11.2.5 IBM Bluemix
Click on "IBM Bluemix", 3 options will appear as the following:
"Function Status", "Publish Message" and "Reset Variable" .
11.2.5.1 Function Status
User can execute an action to change the connection operation
between IBM Bluemix and PMC/PMD in the THEN/ELSE Action
statement; the editing page is shown as follow:
Follow the steps below:
i Specify the connection operation between IBM Bluemix and
ii Click "OK" button to confirm the settings and return to the Rule
11.2.5.2 Publish Message
You can publish messages to IBM Bluemix when executing a
THEN/ELSE Action statement; the editing page is shown as
below:
"Variable Name" field. When this action is executed,
PMC/PMD would reset the content of the variable, and the
evaluation result of the IF statement which is associated with
the variable will be verified again.
settings page.
Figure11-36 : IBM Bluemix Function Status action setting
PMC/PMD to be "Disable" or "Enable" from the dropdown list
of the "Status" field.
settings page.
227
Advertisement
Table of Contents
