Data Logger; Rule Status; Figure11-49 : Reset Modem Action Setting Page; Figure11-50 : Data Logger Action Setting Page - ICP DAS USA PMD Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
The Reset modem action would power off and then power on the
modem again to force the modem back to the initial status, and then the
mobile connection would be re-started if the mobile network
connection is enabled. The setting page is show as below:
Follow the steps below:
Click "OK" button to confirm the settings and return to the Rule
i

11.2.15 Data Logger

You can execute "One-Time Log" in the Action statements to perform
data recording one-time only when an event is triggered. User can also
perform "Start" or "Stop" operation on data logger. The setting page is
show as below:
Follow the steps below:
i In the "Action" field, specify the data logger operation you want to
execute in Action from the dropdown list.
ii Click "OK" button to confirm the settings and return to the Rule
settings page.

11.2.16 Rule Status

The Rule Status can be modified to be Disable or Enable in the Action.
The editing page for Rule Status Action Setting is shown as below:

Figure11-49 : Reset modem action setting page

settings page.

Figure11-50 : Data Logger action setting page

235