Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
v Click "OK" button to confirm the settings and return to the
11.1.3 Power Meter
The power data of the Power Meter could be used as evaluation criteria;
the power data options are as follow: Basic Value, Statistical Value and
Others Informations. The setting page for Power Meter Condition
Setting is shown as below:
Select which type of power data of the Power Meter is going to be used
and then continue the following steps (taking option V as an example):
i Specify the power meter and loop/phase from the dropdown list of
the "Module & Address" section that you are going to include its
value in the IF condition statements.
ii Set up the expression statement for this power data value of the
Power Meter. Select an operator from "=",">","<",">=" or "<=".
iii And then specify the evaluation value. If this power data value of
the Power Meter match the evaluation criteria, the result of this
condition evaluation will be "true".
iv PMC/PMD provides 12 value options; you can compare them with
the power data value of the Power Meter for condition evaluation.
Please refer to
information.
Rule settings page.
Figure11-10 : Power Meter condition setting page
"11.1.1.2 DI
Counter" section for more detailed
206
Advertisement
Table of Contents
