Ping; Figure11-26 : Ping Condition Setting Page - ICP DAS USA PMD Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
dropdown list of "No." field.
ii Set up the expression statement for this PUE value. Select an
operator from "=",">","<",">=" or "<=".
iii And then specify the evaluation value. If this PUE value match the
evaluation criteria, the result of this condition evaluation will be
"true".
iv PMC/PMD provides 12 value options; you can compare them with
the PUE value for condition evaluation. Please refer to
Counter" section for more detailed information.
v Click "OK" button to confirm the settings and return to the Rule
settings page.

11.1.16 Ping

The Ping Status can be used as evaluation criteria for IF condition
statement. The editing page for Ping Condition Setting is shown as
below:
Follow the steps below:
i Specify the Ping that is going to be used in the IF Condition
ii Click "OK" button to confirm the settings and return to the Rule

Figure11-26 : Ping condition setting page

statement from the dropdown list of the "Ping" field. When the
Ping status was failure, the evaluation result will be "true".
settings page.
"11.1.1.2 DI
216