ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
iv Click "OK" button to confirm the settings and return to the Rule
11.1.7 Connection Status
Connection Status can be included in the IF condition statements; the
editing page for Connection Status Condition Setting is shown as
below:
Follow the steps below:
i Specify the module from the dropdown list of the "Module" section
that you are going to include its Connection Status in the IF
condition statements.
ii And then specify the Connection Status to be "Offline" or "Online".
If the Connection Status of the module match the evaluation criteria,
the result of this condition evaluation will be "true".
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
11.1.8 Timer
Timer condition can be used as evaluation criteria for IF condition
statement; the editing page for timer condition setting is shown as
follow:
Subscribe Topic for condition evaluation. Please refer to
"11.1.1.2 DI
Counter" section for more detailed information.
settings page.
Figure11-17 : Connection Status condition setting page
Figure11-18 : Timer condition setting page
211