Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Select the "Source", "Module" and "Channel" from the dropdown list
and click "Insert" to add channel value encoded string into the "Data
Format" content. The system will record the data the user pre-set in the
Data Format, and will save the real data values in the data log file.
When editing the content, the user can select the "View" tab , and then
the channel encoded string will be displayed in the real index format of
the channel for user to check the settings in an easy way.
The figure above shows an example of the encoded strings, the variable
$C3M3ri4352 indicates the V value of PM-3112 CT1 on the module 3
connected to COM3. When user select the "View" tab, the channel
value encoded string will be displayed as "PM-3112 CT1 V" for user to
check if the setting is appropriate (please refer to the figure as below).
viii In the "Log Interval" field, select from the dropdown list to set the time
interval of the recording session. The Log Interval could be 1 min, 5
mins, 15 min, 1 hour, 3 hours, 6 hours, 12 hours and 24 hours. Default
is 5 mins. Each time when reaches the Log Interval, it will perform
one-time data recording for the Power Data and User-Defined Data.
ix In the "File Name Format" field, select the File Name Format of the
log file from the dropdown list, YYYY indicates western year, MM
indicates month, DD indicates date, and the file format is CSV.
In the "End of Line Character" field, select the appropriate End of Line
x
Character format from the dropdown list: CRLF (applies to Windows),
LF (applies to Unix/Linux) or CR (applies to Mac).
xi After all settings are completed, click "Save" button to save the
changes.
Please Note:
The settings in "Log Attribute Setting" section apply to both Power
1.
130
Advertisement
Table of Contents
