ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure10-15 : Example of "Channel Data" Type Variable Binding List
vii You can select the "User-Defined Data" as the variable type. The
setting page interface will be shown as below:
Figure10-16 : "User-Defined Data" Type Setting Page
Set up the content in the "User-Defined Data" field of the SNMP Trap
Variable Binding Setting Page. The User-Defined Data provides
encoded strings for user to add real-time power data or I/O channel
data to the content easily. User can select the "Edit" tab or click on
any blank area in the "User-Defined Data" field, and then the
"Real-time variable editor" will be shown as below.
175