Data Logger Setting; Figure8-2 : Data Logger Setting Page - ICP DAS USA PMD Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
8.1

Data Logger Setting

On the Data Logger Setting page, the user could enable the Power Data
Logger, I/O Data Logger or User-Defined Data Logger of the PMC/PMD if
required. The Power Data Logger allows recording the power data of the
power meters that are connected to the PMC/PMD, the I/O Data Logger
allows recording all the data of the I/O modules that are connected to the
PMC/PMD, and the User-Defined Data Logger allows recording
user-defined data such as: power data, I/O channel data, internal register
values, etc. The setting page is shown as below:
Figure8-2 : Data Logger Setting Page
Follow the steps below:
i Check "Enable" in the "Function Status" field under the Power Data
Logger section to enable the Power Data Logger function.
Set the data log mode to be "Average" or "Instantaneous" from the
ii
128