Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
PMC/PMD also provide the connection ability to the ICP DAS IoTstar
Cloud Manager Software. For more detailed information, please refer to
Appendix
Please Note ： ICP DAS IoTstar Cloud Manager System only support
PMC-523x/PMC-224x/PMD controller.
Please note:
1. PMC/PMD adopts Google DNS server as system default DNS server,
the default IP is "8.8.8.8", the IP can be modified to other DNS server IP
if required.
2. If the connection mode is "Specify an IP address", then you make
modification to the IP address, the system will logout automatically and
re-connect to the web page automatically based on the new setting. If
the connection mode is "Obtain an IP address automatically (DHCP)",
the system may fail to re-connect to the web page because the IP address
is changed. Please use PMC Utility to search the PMC/PMD, get the
new IP address of PMC/PMD, and then launch browser to connect to the
PMC/PMD with the new IP address.
6.3
SNMP Setting
The PMC/PMD provides SNMP(Simple Network Management Protocol)
V1 and V2c to work with the SNMP Network Management software for
monitoring the system data, power meter data and I/O module data. The
SNMP Setting page allows you to enable or modify the settings of the
SNMP function on the PMC/PMD. The following figure illustrates the set
up interface:
VIII.
Figure6-7 :
IoTstar connection setting page
56
Advertisement
Table of Contents
