ICP DAS USA PMD Series User Manual page 236

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
 AO: using AO channel values from XV-Board /M-7000,
select the module and channel from the dropdown list to
specify which channel value will be used.
 Input Register: using value of Input Register from Modbus
RTU/TCP Slave modules, select the module and address
from the dropdown list to specify which channel value will
be used.
 Holding Register: using value of Holding Register from
Modbus RTU/TCP Slave modules, select the module and
address from the dropdown list to specify which channel
value will be used.
 Power Meter: using the power data of the Power Meter;
select the type of power data from the dropdown list first (It
provide as "Basic Values", "Statistical Values" and "Others
Information" for selection). And then select the power
meter and loop(or phase) from the dropdown list to specify
which power meter and loop(or phase) value will be used.
 MQTT: using the value of MQTT subscribe topic, select
221