Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
PMC/PMD to the PMC/PMD.
button and click "OK" to logout the system.
If the settings are not saved to the PMC/PMD before performing
logout, a warming message will appear as below:
Please
1. All the edited settings on the webpage have to be saved to
PMC/PMD to make all settings take effect; before click on
button, the settings will only be saved on the Web page site, not in
the PMC/PMD.
2. Please DO NOT logout or close the web page during the process
of the edition, otherwise all pre-set settings on the page will be
disappeared.
In addition, on the left side of the Rules management toolbar, the user
could give a nickname for this PMC/PMD in the nickname field for
Figure4-8 :
"Logout" button allows to log out the system, click on
Figure4-9 :
Confirm to logout (The settings are saved)
Figure4-10 :
Confirm to logout (The settings are not saved)
note:
Confirm to save settings
11
Advertisement
Table of Contents
