ICP DAS USA PMD Series User Manual page 185

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
the phone numbers you would like to authorize to send SMS
commands to PMC/PMD. Keep on clicking "Add" to add all phone
numbers to send the SMS commands to PMC/PMD, click
"Remove" to remove the phone numbers you want to delete.
note: the Authorized Phone Number has to be input in the format:
"Country code, area code and number". For example, if the
Authorized Phone Number is a cell phone number 0987654321 in
Taiwan area, please input the Authorized Phone Number as
"886987654321".
v Click "Add new SMS command", the SMS Command Setting page
will appear.
vi Input a command string in the "Command" field as the nickname for
the original corresponding command in the "Command String
Editor" section. In the "Command String Editor" section, select the
command type to be "GET" (retrieve real-time channel data) or
"SET" (modify channel data) from the dropdown list. For "GET"
command (shown as Figure 10-9); It provides an encoded string for
you to add current I/O channel data, power data or Internal Register
data into SMS command. To make it easy to add the encoded string,
PMC provides "Real-time variable editor". Please refer to
Logger
variable editor". For "SET" command (shown as Figure 10-10),
select "Source", "Module" and "Channel" from the dropdown list,
and then set the "Value" to be modified (you can also leave the
"Value" field blank, and input the value later according to
requirement in real-time when send back the SMS Command). Take
Figure 10-10 as an example, you can leave the "Value "field blank
and input the SMS Command AI/2.3 to modify the AI channel value
to be 2.3.
Setting" for more detailed information of the "Real-time
Please
"8.1 Data
170