Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure7-29 :
Scanning the M-7000/DL modules
iv After the Scan operation is completed, an M-7000/DL module list
will appear (Figure 7-30). If the newly scanted module doesn't
match the module previously set on the same address, a window will
appear (Figure 7-31), please select the actual device that are
connected to PMC/PMD. After all settings are completed, click
"Save" button to save the changes.
Figure7-30 :
The M-7000/DL List after Scan operation
Figure7-31 :
Select the actual M-7000/DL modules connected to PMC/PMD
103
Advertisement
Table of Contents
