Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Set up the I/O channel value.
Command
Parameters
job=set_channel_val&
if_type=val&com_port=val&module_no=val&
ch_type=val&ch_addr=val&ch_value=val
Name
if_type
Description The I/O module Interface
Value
0: XV-Board
1: COM Port
2: Network
Name
com_port
Description If the I/O interface is XV-Board or
Ethernet, skip this parameter. If
the I/O interface is COM Port, it is
the COM Port number.
Value
0: COM0
1: COM1
...so on.
Name
module_no
Description The index number of the module. If
the I/O interface is XV-Board, skip
this parameter.
Value
Integer; start from 1.
Name
ch_type
Description The channel type
Modbus Module：co, ro
Value
ICP DAS I/O Module：do, ao
Infrared Module：ir
Name
ch_addr
Description Channel Address
Value
The ch_addr is Modbus Data Address
for the Modbus module. For ICP DAS
I/O module, the ch_addr is the
330
Advertisement
Table of Contents
