Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below:
i In the "Trap" field, specify the SNMP Trap you want to execute in
Action from the dropdown list.
select has to be the pre-set SNMP Trap in the
of Advanced
such as "Variable Bindings" and message content will be displayed
for you to verify if this is the SNMP Trap you want to send.
ii Select the Action Execution Frequency, there are two options as
"One Time" and "Repeat" for selection. Please refer to
THEN/ELSE Action
Time" and "Repeat" operation.
iii Input the value in the "Waiting Time" field, it means after the action
be executed, how long the system will delay to execute the next
Action. The unit will be second(s).
iv Click "OK" button to confirm the settings and return to the Rule
settings page.
11.2.11 LINE Notify
You can send a specific LINE Notify message to LINE personal
account or group chat rooms when executing a THEN/ELSE Action
statement. The setting page is show as below:
Follow the steps below:
i In the "Message" field, specify the LINE message you want to send
in Action from the dropdown list. The selected LINE Notify
message such as "Chat Room" and message content will be
displayed for you to verify if this is the LINE message you want to
send.
Figure11-45 : SNMP Trap Action Setting Page
Please note, the SNMP Trap you
Setting" section. The selected SNMP Trap message
Setting" section for the description of "One
Figure11-46 : LINE Notify action setting page
"SNMP Trap Setting
"11.2
233
Advertisement
Table of Contents
