ICP DAS USA PMD Series User Manual page 328

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
1. Power off the PMC/PMD.
2. Switch the Rotary Switch to position 7.
3. Power on the PMC/PMD, when the RUN/PWR LED Indicator turns to be
Orange(ON state), it indicates that the setting is completed.
IP Address
Subnet Mask
Gateway
DNS
Port for Web Server
Port for Modbus TCP
Modbus TCP NetID
4. Switch the Rotary Switch to position 0
 Send the login password to the Email account of the Administrator
1. Switch the Rotary Switch to position 8.
2. Connect to PMC/PMD Login webpage via Web browser. Now a "Forget
password" message will be displayed under the password field. Click the
"Forget password" message, then the system will send the both passwords of
the Administrator and the General User to the Email account of the
administrator that was previously set by the user in
section.
The following figure illustrate an example of the Email the PMC/PMD sends
to the Email account of the Administrator. The Email content will include the
password of the Administrator, the password of the General User and the
password of the FTP Server of PMC/PMD.
LAN1：192.168.255.1
LAN2：192.168.255.2
255.255.0.0
192.168.0.1
8.8.8.8
80
502
1
"6.4 Security
Setting"
313