Group And Subgroup Configuration; Setup The Loops/Phases Of The Subgroup; Figure6-28 : Configurations For Subgroup - ICP DAS USA PMD Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
6.7.3

Group and Subgroup configuration

The
Group/Subgroup Setting page. Please select the group/subgroup first
and click on the function button to perform the configurations:
 Change Name：Click the radio button in front of the group
 Move Up：Click the radio button in front of the group name
 Move Down：Click the radio button in front of the group
 Copy：To copy the settings of a pre-set group to the new
 Remove：Click the radio button in front of the group and
 Close：Click the "Close" button to return to group setting
6.7.4

Setup the loops/phases of the subgroup

i Click the "Set up" button (
window.
Figure6-28 :
group/subgroup configurations
and click on "Change Name" to change the name of selected
group. Click "OK" button to save the changes.
and click on "Move Up" to move the group to upper order
(upper index number (No.)).
and click on "Move Down" to move the group to lower order
(lower index number (No.)).
group, please click the radio button in front of the pre-set
group and then click on "Copy", a new group (in sequence)
will be added to the list and the settings of the old group will
be copied to this newly added group.
click on "Remove" to remove the selected group.
page.
Configurations for Subgroup
can be
) of subgroup to open the setting
done on the
73