Figure7-38 : M-7000 Di Channel Setting Page - ICP DAS USA PMD Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
The settings interfaces of the DI, DO, AI and AO channels on the
M-7000/DL/IR Module are as below:
 The DI channel setting for M-7000 module
The M-7000 module DI channel setting interface is shown as
below (using M-7052 as an example)
The settings are as below:
 Nickname：For user to define nickname for each I/O channel,
 Reset counter when power on: If the "Reset counter when
After all settings of the DI channels are completed, continue the
configuration of other channel, and after all channel settings are
completed, click "OK" button to save the changes and return to
Modbus RTU Module List.
Figure7-38 :
this nickname will be displayed on the "I/O Information" and
"Rule Setting" pages.
power on" is selected for the DI channel, the DI channel counter
of this M-7000 module will be reset to the default value when
the PMC/PMD is powered on or after loading the rules.
M-7000 DI Channel Setting Page
108