Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
On Figure 10-11, taking the first SMS Command on the list as an
example,
PMC-5231-3GWA, PMC-5231-3GWA will send back the data of
DI0, DI1, & DI2 of the XV-Board, the Total/Average value of the
kW from module PM-2133(2) on COM3, and value of Internal
Register 1 to the command sender.
Taking the second SMS Command on the list as an example, when
user
PMC-5231-3GWA will set the value of AO0 on XV-Board to be
2.3 after receiving the message.
Taking the third SMS Command on the list as an example, when
user
PMC-5231-3GWA will set the value of DO0 on XV-Board to be
ON after receiving the message.
ix To modify the settings of a pre-set SMS Command, please click on
the radio button in front of the SMS Command, and then click on
"Setting" to modify the settings.
x To copy the settings of a pre-set SMS Command to the new SMS
Command, please click the radio button in front of the pre-set SMS
Command and then click "Copy", a new SMS Command will be
added to the list and the settings of the old SMS Command will be
copied to this newly added SMS Command.
xi To remove a pre-set SMS Command, please click the radio button in
front of the pre-set SMS Command and then click "Remove".
After you finish all the SMS Command selections and settings, click "Save"
button to save the settings.
when
user
send
send
SMS
message
send
SMS
message
SMS
message
"DATA"
"AO"
to
PMC-5231-3GWA,
"DO"
to
PMC-5231-3GWA,
to
172
Advertisement
Table of Contents
