ICP DAS USA PMD Series User Manual page 339

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
The SNMP Variables naming rule of the I/O modules that are connected to PMC.
 Every I/O module that is connected to PMC-523x/PMC-224x provides the SNMP Variables as
above (with its specific prefix denoted).
 The SNMP Variables naming rule of the I/O modules on Com3
The I/O Module1 SNMP Variables are shown as above (with prefix com3io1), the I/O Module2
SNMP Variables are similar to listed information above but with prefix
the I/O Module16 SNMP Variables are also similar to the listed information above but with
prefix com3io16
 The SNMP Variables naming rule of the I/O modules on Com4
The I/O Module1 SNMP Variables are similar as listed information above but with prefix
com4io1, the I/O Module2 SNMP Variables are similar to listed information above but with
prefix com4io2
information above but with prefix
 The SNMP Variables naming rule of the I/O modules on LAN
The I/O Module1 SNMP Variables are similar as listed information above but with prefix
lanio1, the I/O Module2 SNMP Variables are similar to listed information above but with prefix
lanio2 instead, and the I/O Module16 SNMP Variables are also similar to the listed information
above but with prefix
otherInfo
com3io1DiscInputName
com3io1DiscInputModbusAdd
com3io1DiscInputResetCounter
com3io1CoilOutputName
com3io1CoilOutputModbusAdd
com3io1InputRegIndex
com3io1InputRegValue
com3io1InputRegType
com3io1InputRegOffset
com3io1InputRegScaleMin
com3io1HoldingRegIndex
com3io1HoldingRegValue
com3io1HoldingRegType
com3io1HoldingRegOffset
instead.
instead, and the I/O Module16 SNMP Variables are also similar to the listed
com4io16
lanio16 instead.
irIndex
pueIndex pueName
com3io1DiscInputValue
com3io1DiscInputCounterValue
com3io1CoilOutputIndex
com3io1CoilOutputValue
com3io1CoilOutputAdvFunction
com3io1InputRegName
com3io1InputRegModbusAdd
com3io1InputRegScaleRatio
com3io1InputRegDeadband
com3io1InputRegScaleMax
com3io1HoldingRegName
com3io1HoldingRegModbusAdd
com3io1HoldingRegScaleRatio
com3io1HoldingRegDeadband
instead.
irName
pueTotalEnergy
com3io2 instead, and
irValue
pueITEnergy pueValue
324