Iotstar Bot Service Setting - ICP DAS USA PMD Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below:
i. To enable PMC/PMD's historical data upload operation, users need to
enable Data Logger function of PMC/PMD first. More detailed setting
information please refers to the
ii. In the "Function Status" field, check "Enable" to enable the data file
upload function and select the type of data log file you would like to
upload.
iii. After all settings are completed, click "Save" button to save the setting.
9.6

IoTstar Bot Service Setting

The v3.3.0 (and later version) firmware of PMC/PMD supports the message
sending function to IoTstar Bot. When PMC/PMD is set to connect to an
IoTstar server and the IoTstar server enables IoTstar Bot function,
PMC/PMD can send message to the LINE accounts that bind with the
IoTstar server. About the detail of IoTstar Bot, please check the IoTstar web
page. The configuration page for message setting is shown as below.
In the Message setting page, users can edit the messages which would be
sent to IoTstar Bot with the pre-input strings, Power data, I/O channel data
and Internal Register value. The configuration page is shown as below:
Follow the steps below:
i. Click "Add new message", the Bot Service Message Setting page will
appear as following:
section"8.1 Data Logger Setting".
161