Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Register.
Please Note: there are up to 70 Internal Register can be enabled, if the
name of the register is not inputted, the name will be automatically set
as "Internal Register#"(#is the number of the register), the default initial
value will be set as 0.
ii
To modify the settings of a pre-set internal register, please click on the
radio button in front of the register, and then click on "Setting" to
modify the settings. If user want to edit the formula for Internal
Register, please check "Enable" in the "Function Status" field of the
"Formula Setting" section.
iii Edit math formula in the "Formula" field. Users can select the
"Interface", "Module" and "Channel" from the dropdown list and click
"Insert" to add a channel value encoded string into the formula, and use
the operators as "+", "-", "*", "/", "^", "(" and ")" to edit the formula.
For example, if user edit a formula as below:
$C3M1m10 + $C3M2m10 +$C3M4m138
In the "View" tab, it would be displayed in the real index format of the
power data and I/O channel as below. User can click the "Test" button
to check the result of the formula.
Please note:
Figure10-38 : Internal Register setting page(2)
192
Advertisement
Table of Contents
