Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Figure9-7 :
MQTT Setting Page (Broker)
The settings steps are as below:
i. Click the "Broker Setting" tab on the right-top corner of "MQTT
Setting Page".
ii. Click on "Add new MQTT Broker" to add the new MQTT Broker.
After clicking the "Add new MQTT Broker", the MQTT Broker
Setting Page will appear. The upper half area of the setting page is
about the Broker parameters setting. It will be shown as below:
Figure9-8 :
MQTT Broker Parameter setting page
iii. In the Broker parameters setting page, you can input the name of the
Broker in the "Nickname" field and you could also input the
description of this Broker in the "Description" field.
152
Advertisement
Table of Contents
