Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the following steps:
i Select the pre-defined Timer from the dropdown list of the "Timer"
field. Please note: the Timer you select has to be created in
Advanced Setting.
ii Specify you want to "Reset" or "Start" this Timer when this
THEN/ELSE Action statement is executed. The Start Action will
start to run the Timer and if the Start Action is triggered one more
time when the Timer is running, the Timer will restart again. The
Reset action will reset the Timer and stop running the Timer.
iii Click "OK" button to save the settings. The popup window will be
closed and return to the Rule settings page.
11.2.8 Email
You can send a Email message to an Email group when executing a
THEN/ELSE Action statement; the editing page is as below:
Follow the steps below:
i Select a pre-set Email group from the dropdown list of the "Index"
field.
Advanced Setting. The Email group information will be displayed
for you to verify if this is the Email group you are going to send the
message to.
Figure11-42 : Timer action setting page
Figure11-43 : Email action setting page
Please note: the Email you select has to be enabled in
231
Advertisement
Table of Contents
