Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
11.1.2.2 Coil Output
Coil Output channel value from Modbus TCP/RTU Slave module
can be included in the IF condition statements; the editing page for
Coil Output Condition Setting is shown as below:
Follow the steps below:
i
ii Define the evaluation criteria of the status in IF statement to be
iii Click "OK" button to confirm the settings and return to the
11.1.2.3 Input Register
Input Register channel value from Modbus TCP/RTU Slave
module can be included in the IF condition statements; the editing
page for Input Register Condition Setting is shown as below:
Follow the steps below:
i
Rule settings page.
Figure11-7 :
Specify the module and address of the Modbus TCP/RTU
Slave module from the dropdown list of the "Module &
Address" section that you are going to include its value in the
IF condition statements.
"OFF" or "ON".
Rule settings page.
Figure11-8 :
Specify the module and address of the Modbus TCP/RTU
Slave module from the dropdown list of the "Module &
Address" section that you are going to include its value in the
Coil Output condition setting page
Input Register condition setting page
204
Advertisement
Table of Contents
