ICP DAS USA PMD Series User Manual page 72

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Follow the steps below to set up Dynamic DNS service:
Click the services tabs on the right-top corner of "Dynamic DNS
i.
service". System provides two items for selection as "Service 1"
and "Service 2". User can enable one Dynamic DNS service for
normal status, or enable two Dynamic DNS services for the
redundant service.
In the "Service Provider" field, select the provider of Dynamic
ii.
DNS services from the dropdown list. Currently system provides 5
service providers for selection as "No-IP", "ChangeIP", "Free
DNS", "Dyn" and "DNS-O-Matic". User can also select "Disable"
to disable the service.
If user selects "No-IP", "ChangeIP", "Dyn" or "DNS-O-Matic",
iii.
please enter the ID, Password and Domain Name to login the
service. If user selects "Free DNS", please insert the Token to
login the service.
After all settings are completed, click "Save" button to save the
iv.
changes.
 IoTstar Connection Setting
The IoTstar Connection Setting section is for user to complete the
PMC/PMD's setting for the Network connection to the IoTstar. Please
follow the steps below for the settings:
Please Note：ICP DAS IoTstar Cloud Manager System only support
PMC-523x/PMC-224x/PMD controller.
i. Make sure the firmware version of the PMC/PMD is V3.6.0 or
later version. If the PMC/PMD does not install with the right
firmware version, please update the firmware before taking the
next step.
57