ICP DAS USA PMD Series User Manual page 346

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Response
 Get the specific channel value of the remote I/O module or Power module.
Command
channel sequence number starting
from 0.
For infrared module, the ch_addr is
the output channels in binary
format. The first bit (LSB) of the
value represents the 1st channel.
The 2th bit represents the 2th
channel. For example: The 1st and
2nd output channels: 0x03 == 0011
(binary)
Name ch_value
Description The value you want to assign to the
output channel.
Value Digital type channel: 0 or 1.
Analog type channel: Number
Infrared module: command index
The channel is existed.
{
"status": "OK"
}
The module or channel does not exist.
{
"status": "CHANNEL_NOT_EXIST"
}
Password error
{
"status": "PASSWORD_INCORRECT"
}
Job=get_channel_val&
if_type=val&com_port=val&module_no=val&
ch_type=val&ch_addr=val
&submeter=val&ct_no=val (for Power module)
331