Modbus Rtu Power Meter Setting - ICP DAS USA PMD Series User Manual

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
 Move Up: Click the radio button in front of the power meter
 Move Down: Click the radio button in front of the power meter
 Copy: To copy the settings of a pre-set power meter to the new
 Remove: Click the radio button in front of the power meter and
After all settings are completed, click "Save" button to save the
changes.
7.1.5

Modbus RTU Power Meter Setting

PMC/PMD support ICP DAS Single-phase and Three-phase Modbus
RTU Power Meters, the following section will give more detailed
settings of each power meter setting page.
 The Three-Phase Modbus RTU Power Meter Setting page is shown
as follow (using PM-3133 as an example):
following section.
and click on "Move Up" to move the power meter to upper
order (upper index number (No)).
and click on "Move Down" to move the power meter to lower
order (lower index number (No)).
power meter, please click the radio button in front of the pre-set
power meter and then click on "Copy", a new power meter (in
sequence) will be added to the list and the settings of the old
power meter will be copied to this newly added power meter.
click on "Remove" to remove the selected power meter.
88