Table of Contents
Advertisement
ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
Click on "MQTT", 3 options will appear as the following: "Broker
Function", "Publish Message" and "Reset Topic".
11.2.6.1 Broker Function
User can execute an action to change the function status of MQTT
Broker in the THEN/ELSE Action statement; the editing page is
shown as follow:
Follow the steps below:
i Select the specific Broker from the dropdown list of the
ii Specify the Broker Function status to be "Disable" or "Enable"
iii Click "OK" button to confirm the settings and return to the Rule
11.2.6.2 Publish Message
You can publish a MQTT Topic to the Broker when executing a
THEN/ELSE Action statement; the editing page is shown as
below:
Follow the steps below:
Figure11-39 : Broker Function action setting page
"Broker" field.
from the dropdown list of the "Status" field. When the Action
being executed, the Broker Function status will be changed to
specified status.
settings page.
Figure11-40 : Publish Message action setting page
229
Advertisement
Table of Contents
