ICP DAS PMC/PMD Series User Manual
9.2
IBM Bluemix Setting
On the IBM Bluemix Setting page, the user could enable the connection to
IBM Bluemix IoT Cloud Platform if required. The setting page is shown as
below:
Follow the steps below:
i Check "Enable" in the "Function Status" field to enable the connection
to IBM Bluemix IoT Cloud Platform.
ii In the "Organization ID", "Device Type", "Device ID" and "Device
Authentication Token" fields, input the data you previously registered
for this PMC-52xx/PMD from IBM Bluemix. After you completing the
device settings on IBM Bluemix for the PMC-52xx/PMD, IBM
Bluemix will reply you the device information similar as below.
J
u
s
t
refer to the information and complete the setting at PMC-52xx /PMD
Figure9-5 :
IBM Bluemix Setting page
142