Figure9-7 : Mqtt Setting Page (Broker); Figure9-8 : Mqtt Broker Parameter Setting Page - ICP DAS USA PMC series User Manual

ICP DAS PMC/PMD Series User Manual
at the same time, and the Topic setting for the two Brokers is also
independent. The configuration page of MQTT Broker setting is shown
as below:
The settings steps are as below:
i. Click the "Broker Setting" tab on the right-top corner of "MQTT
Setting Page".
ii. Click on "Add new MQTT Broker" to add the new MQTT Broker.
After clicking the "Add new MQTT Broker", the MQTT Broker
Setting Page will appear. The upper half area of the setting page is
about the Broker parameters setting. It will be shown as below:
Figure9-7 : MQTT Setting Page (Broker)
Figure9-8 : MQTT Broker Parameter setting page
145